Chaletrv is supported by its audience. When you buy through our links, we may earn an affiliate commission. Learn more

RV Leveling & Stablization

How to Level a Travel Trailer on a Permanent Site – 8 Steps

/

by Yessenia Blanda

/ fact checked by Sam Howard

how to level a travel trailer on a permanent site

Living in a travel trailer, you may have noticed it is not as easy as it looks to keep things leveled.

Learning how to level a travel trailer on a permanent site ensures safety and stability, allowing you all the comforts and convenience of home in a prime location where your family can have the best times of your lives.

If you have issues leveling your travel trailer, this how-to guide will help you accomplish the task with flying colors.

What to Prepare

level-a-camping-trailer

1. The Correct Spot

The first thing you will need to do is find the correct spot for your trailer. You want to make sure that you have enough room to place levels on travel trailer at all sides.

2. RV Levels

There are two types of levels that you can use: the bubble type and the Bluetooth type. Both work well to properly level a travel trailer.

However, we recommend using the Bluetooth kind because it’s easier to read and more accurate. The Bluetooth type has a display that shows you how level your trailer is in relation to what it should be when parked on flat ground.

3. Tire Chocks

Tire chocks are typically used on the rear wheels, so the latter can hold up against the weight of your vehicle when it’s permanently parking.

Some owners prefer using chocks on all four wheels for maximum safety against rolling over when parked, especially on uneven ground.

4. Leveling Blocks

These are made of strong plastic and feature interlocking tabs, and are ideal for uneven surfaces.

They can be used in combination with wheel chocks to permanently stabilize a camper while on a slope or hillside, or used alone to level your rig at home or in campground parking lots.

5. Stabilizer Jacks

You also need stabilizing jacks to level a camping trailer. These jacks help lift up one end of your trailer so that you can adjust its height until it’s level with the other end.

6. Tongue Jack Stand

When you level a RV trailer, the tongue jack is your friend. You should have one of these installed on your camper and ready to use before you even start trying to level out your rig.

You can use wooden planks to reinforce your stand since they’re inexpensive.

Step-by-step Process in Setting up a Travel Trailer Permanently

level-a-camper-without-moving-it

Step 1: Choose and prepare your site

Preparing the site where you want to make a travel trailer permanent is important to the leveling process. Find the most level ground and clear it of all potential obstacles like rocks or stumps.

best-way-to-level-a-travel-trailer

If possible, choose a site with a concrete pad or gravel driveway because these surfaces are flat and make leveling travel trailer permanent site easier than dirt or grassy areas.

Step 2: Check your travel trailer’s level

Check your travel trailer with a level. Find out where the high and low points are on your RV.

Note: Before you start leveling, make sure that your rig isn’t extended with a slide out. Doing so will avoid inflicting damage on the mechanism, which would need extensive repair.

Step 3: Position the leveling blocks

The best way to level a travel trailer is by using modern leveling blocks instead of DIY objects like bricks or concrete blocks. These new products are designed specifically for trailers and come in different sizes, depending on what kind of rig you have.

Position the leveling blocks under each corner of your trailer. The goal is to have them sitting flat on the ground with no wiggle room — there should be little-to-no gap between the bottom of the block and where it touches down on concrete or asphalt.

Step 4: Move your trailer onto the leveling blocks

level-a-rv

You’ll need to move your trailer on blocks so that the vehicle is on top of them. Be sure to check as you’re driving to make sure the latter are squarely placed under your tires. All four tires should touch the blocks evenly across their entire widths.

Step 5: Install the wheel chocks

Wheel chocks are helpful when you want to level a camper without moving it. They are designed to keep your trailer from rolling while parked or being loaded or unloaded.

If the vehicle is not level and has no chock blocks in place, it can easily roll away from its parking spot and end up hitting something else, such as another vehicle or even a building. The results could be devastating for everyone involved.

You need to install wheel chocks on each side of your trailer. When you level a single axle travel trailer or any other RV, you would normally place them under each tire at the outer edge of the wheels.

Step 6: Lower the trailer tongue jack

You may have noticed that when you park your travel trailer, it sinks down into the ground. This is because the lightweight tongue jack was never designed to support the entire heft of your trailer.

The best way to stabilize a travel trailer is to use a jack stand made of wooden planks. This will keep the RV from sinking into the ground and prevent damage to your tires and wheels.

Step 7: Install any stabilizing jacks

make-a-travel-trailer-permanent

Most newer trailers have these jacks built into them already, but if yours doesn’t have them yet, then they are easy to add. Jacks are usually mounted under the frame, just behind where the wheels get attached.

The jacks should be installed as close to level as possible without touching anything under them (such as pipes). They should be spaced evenly between the center line of each wheel and the front bumper if possible.

Step 8: Recheck your trailer’s level

Once you complete the process, check your RV level both front to back and side to side. It’s important that all four wheels are at the same height so that your RV has a level stance.

If one tire is slightly higher than another, it can cause damage to other parts of your RV, such as the roof or even internal mechanics.

Note: All the above steps work for a 5th wheel permanent setup as well.

Frequently Asked Questions

travel-trailer-permanent-site

Why do I need to level my travel trailer on a permanent site?

Leveling the trailer will ensure that your tires wear evenly and that there is no damage to the axles or suspension system. It will also help prevent any leaks from occurring in the plumbing or septic system.

What is the easiest way to level a travel trailer?

A tool like LevelMate Pro is an excellent choice for leveling your travel trailer when you’re parked on a fixed site. The device works by mounting directly to your vehicle and measuring how far off level it is.

It then tells you exactly how much height needs to be added or removed from each side of the vehicle to bring it into alignment.

Where to place levels on a travel trailer?

Most people think they should put leveling jacks at the front corners of their trailers, but this isn’t always true.

More often than not, you’re going to want to place your levels at multiple points throughout your travel trailer in order to find its center of gravity. Examples would be the center of both the back wall and sidewall.

Can you put a travel trailer on a permanent foundation?

The short answer is yes, you can put a travel trailer on a permanent foundation made out of concrete or wood blocks. If you’re going to be staying in one spot for a while, this can be a cost-effective way to make your travel trailer feel more like home.

Are permanent travel trailer spots level?

No. A permanent campsite can have slopes or even holes in the ground that make it impossible to park your camper.

You need to know how to level your travel trailer on a permanent site so that you can use it as long as possible and enjoy your time off camping.

Conclusion

Whether you’ve just purchased an RV or if you’re looking for ways to park your vehicle, knowing how to level a travel trailer on a permanent site will help ensure that it stays in good condition and is safe to drive.

It may take some time and effort, but once you have mastered these steps, leveling will become second nature during every trip! Following this guide should help you achieve the level of stability that you want from your travel trailer.

5/5 - (1 vote)
Yessenia
About
Yessenia Blanda

Hi, I’m Yessenia. I love traveling and being on the road, and I want to share my experience with people who are looking to have some adventures of their own. 

Whether you’re a new or experienced RVer, I hope you’ll find something here that helps you on your journey.